Description
This smoke alarm cable is typically made with solid or stranded copper conductors and is covered by an outer jacket and an additional layer of shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI). The additional shielding layer of the smoke alarm cable is typically made of a metallic material, such as copper, and is designed to prevent EMI and RFI from interfering with the signals transmitted by the cable. In systems with a lot of cable lines and electronic equipment, shielded fire alarm cables will offer you a better signal without interference.
FPLR [riser rated, non-plenum] and FPLP [plenum rated].
Compliance
- UL13, Power-Limited Circuit Cable
- UL 1424. Power-Limited Circuit Fire Alarm Cable
- NEC Article 760 and 725: NFPA 262(UL 910)
- RoHS Compliant
Application
- Door Controllers
- Fire protection
- Alarm and Signal
- Monitor / detection
- Prox Sensors
- Key Pads
- Audio Circuits
- Sound System
- Control Circuit
- Smoke detectors
Features
Ideal for Indoor remote control of security, Intercom and Sound systems.
Used for Powering Limited-Control Circuits or Burglar Alarms.
Electrical Properties
- Operating Temp: 20℃~+75℃
- Operating Vol: 300 Volt
Specification
| Item No. | AWG Size | Conductors | Strands | Insulation Thickness(mm) | Shield | Drain Wire | Jacket Thickness(mm) | O.D.(mm) |
| 18/2 SHLD | 18 | 2 | Solid | 0.25 | Al-Mylar Foil | 24AWG Tinned Copper | 0.35 | 4 |
| 18/4 SHLD | 18 | 4 | Solid | 0.25 | 0.35 | 4.5 | ||
| 16/2 SHLD | 16 | 2 | Solid | 0.25 | 0.35 | 4.3 | ||
| 16/4 SHLD | 16 | 4 | Solid | 0.25 | 0.35 | 5.4 | ||
| 14/2 SHLD | 14 | 2 | Solid | 0.25 | 0.35 | 5.4 | ||
| 14/4 SHLD | 14 | 4 | Solid | 0.25 | 0.35 | 6.4 | ||
| 12/2 SHLD | 12 | 2 | Solid | 0.3 | 0.35 | 6.4 |
