Skip to content Skip to footer
Tongda
Request a Quote
Tongda
Request a Quote
Close
RG6 Quad Shield
RG6 Quad Shield

RG6 Quad Shield TV Cable

Construction

  • Center Conductor: 18 AWG Copper Covered Steel
  • Nom Dia: 0.0401”(1.02±0.01mm)
  • Dielectric: Foam PE
  • Dia Over Dielectric: 0.180”Nom.(4.57±0.10mm)
  • Inner Shield: Tape: Aluminum/Poly(Bonded)
  • Braid: 36AWG Aluminum(60% Coverage)
  • Nom Dia: 0.203”±0.006”(5.15±0.15mm)
  • Outer Shield: Tape: Aluminum/Poly
  • Braid: 36AWG Aluminum(40% Coverage)
  • Nom Dia: 0.226”±0.006”(5.75±0.15mm)
  • Jacket: PVC
  • Dia Over Jacket: 0.300”±0.006”(7.62±0.15mm)
  • Nominal Jacket Thickness: 0.033”(0.83mm)
  • Minimum Spot: 0.027”(0.68mm)

Electrical Properties

  • Operating Temp: -20℃～+75℃
  • Sparker Test: 2500V
  • Dielectric Strength: Conductor to Shield: 2000VDC
  • Capacitance: 16.0 pF/FT.Nom. 52.5 pF /m.Nom.
  • Characteristic Impedance: 75.0±3.0 Ohms
  • Velocity of Propagation: 82.0% Nom.
  • DCR: Conductor: 30.48Ohms/1000 FT. 100Ohms/Km
  • SRL: 20dB(1 thru 300MHz)100% Swept Tested
SKU: Rg6 Categories: , Product ID: 21732

Description

The quad shielding in this RG6 TV cable refers to the four layers of shielding that are designed to reduce interference and signal loss. The layers include a foil layer, two layers of braided shielding, and an outer jacket. The foil layer helps to prevent electromagnetic interference (EMI) and radio frequency interference (RFI) from entering or exiting the cable. The braided shielding layers provide additional protection against interference, and the outer jacket provides physical protection for the cable.

Specification

Frequency MHz dB/100FT.(NOM.) dB/100M.(NOM.)
10 1.00 3.28
50 1.48 4.86
100 2.00 6.56
200 2.75 9.02
400 3.89 12.76
700 5.37 17.62
900 6.28 20.60
1000 6.53 21.42
1200 7.23 23.72
1450 8.09 26.54
1800 9.42 30.91
2200 10.40 34.12
3000 12.80 41.99

Related products